Some factors will affect the work efficiency of the steel plate leveling machine, let's analyze it below, and then avoid it. 1 Check whether the machine is normal Check the connection and tightening of the parts of the steel plate leveling machine, whether the connecting bolts are loose or broken, and tighten or replace if necessary. Check whether there is any leakage, and eliminate the leakage in all parts
Read More
It is common for steel plate leveling machine equipment to fail. As long as the cause is found and solved in time, it will not have a big impact. In view of this, we must have an understanding of the causes of common machine failures so that we can deal with them calmly. So today, let's talk about the problems related to the leveling machine. For a leveler, vibration marks and bubbles are a headache. Among the
Read More
1. The transmission device is the same as the frequency converter (circulation control) and can be synchronized with the punching machine for balanced feeding. Two-stage leveling. During the coil leveling process, (both ends-tail end), there is no need to adjust the leveling in the middle, which can ensure the same flatness. Due to the different curvatures of the materials, a single straightening roll arrangement can
Read More
Work-piece will get out of shape at stamping process, especially at piercing hole edge, trimming area, forming area etc. as the equilibrium of tension and compression was broken at these areas. In laser cut process, work-pieces get out of shape because of high temperature process cause breaking inner stress. So it will surely influence the following process of bending, welding etc. process if don’t do work-piec
Read More
